Temporoc

Multi-Purpose Mixed-Signal SiPM Readout ASIC

About the Product

Temporoc is a 64-channel front-end ASIC designed to read out silicon photomultipliers (SiPMs) for particle time-of-flight measurement applications.

temporoc

Calibration & Signal Processing

Adjustment of the SiPM high voltage is possible through a channel-by-channel input DAC. This allows fine control of SiPM gain and dark noise at the system level to compensate for non-uniformities between detectors.
Power consumption is 5 mW per channel. Temporoc is suitable for any application requiring both precise timing and accurate energy measurement, such as time-of-flight gamma detection.

Parameters

TRL Technology Readiness Level

Available Versions

Detector Readout

Number of Channel
4 – ASIC Validated in Lab Environment
  • Discontinued
  • Active
SiPM
64
Signal Polarity
Sensitivity
Timing Resolution
Dynamic Range
Positive
Trigger on the First Photo-Electron
20 ps rms (TBC)
3000 Photo-Electrons (106 SIPM gain), Integral Non-Linearity: 1% up to 2000 ph-e

Packaging & Dimension

Power Consumption
Inputs

Outputs

BGA (20×20 mm, 500 balls – TBC)
Power Supply: 1.2 V, 330 mW
64 Voltage Inputs with DC Adjustment for SiPM HV Tuning
  • Digital Output (Dual ADC and Dual TDC Per Channel) – Selectable Transmission Mode
  • 1 Multiplexed Time Trigger Output
  • 2 ASIC Trigger 0R Outputs (64 channels, 2 levels)

Internal Programmable Features

Evaluation systems

  • 64 HV Adjustment for SiPM (64×8 bits)
  • Time Trigger Threshold Adjustment (10 bits)
  • Charge Measurement Tuning
  • ADC Peak Sensing, 64 Trigger Masks
  • Internal Temperature Sensor
  • Channel-by-Channel Output Enable
  • Trigger Latch
  • Programmable Data Output
Evaluation Board: 64 Channels – Available

Parameters

*Click the image to enlarge

Diagram

Temporoc is Part of the GenerIC Family of ICs

GenerIC is a new readout chip family developed by Weeroc. It features fast, flip-chip packaged integrated circuits that are pin-to-pin compatible with one another. Switching detectors and their front-end electronics becomes straightforward with the GenerIC family.
Pin-to-pin compatibility allows users to retain the same front-end electronics while swapping the detector and ASIC, without impacting the downstream data stream. GenerIC simplifies multi-detector readout by providing a unified readout scheme that is independent of the detector type.

Explore the GenerIC family:

Evaluate Temporoc

Develop your proof of concept using our fully open-source evaluation system. We provide all the essentials: reference schematics, open-source firmware written in VHDL, and software developed in Python.
The Weeroc evaluation system supports 64 channels of readout electronics. Inputs are provided via a convenient HE10 connector for simple detector interfacing, with USB output to a computer. The firmware and software enable straightforward calibration and user-friendly data acquisition with Temporoc.
Source:

2022-10-13, Talk

2023-09-15, Invited Talk

Latest development of Weeroc Front-End ASICs, Julien Fleury

Downloads

Distribution Network

All Weeroc products are distributed worldwide by CAEN.
Please contact your local representative or get in touch with us.

Design Review

Weeroc offers free support to review your board design, integrating one of our ASICs.
Connect with our engineering team to help ensure a first-time-right design for your front-end electronics.

Build What Sets You Apart

In just 15 minutes, we can map out the start of a potential collaboration.

PIC: Jean-Baptiste Cizel (temporoc@weeroc.com)